STARBOND Super Glue Remover, Dissolves Adhesive, CA Glue Debonder, Easy Brush Cap Applicator, 2 oz

I was using a small tube of Super Glue and small blob got on the top of my MacBook Pro lid. I didn't notice until the glue dried and I tried scraping with my finger nail but there was no way I was going to get it off. I purchased this product hoping I can make the top of my MBP look decent. This product works and it took off 100% of the Super Glue and you would never notice the glue was ever there! It doesn't cause any issues or discoloration either. I applied what was on the brush onto the area where the glue was, let it sit for 30 minutes, then it simply wiped off with a dry cloth. I then used a damp paper towel just to wash off any streaking from the first wipe. All I can say is thank you to this company for making this product. My MBP look brand new again!

It may or may not be effective, but it did not work for me. I had a small thin spot of superglue on a cotton polyester mix material, and despite several attempts, it did not remove it. Although I didn’t request it, they offered me a full refund for the product on their own, and I accepted it. The product is obviously worth a try, and if it doesn’t work out, there’s no loss at least there was not for me.

Best CA Glue remover everThis stuff WORKS!!! No pain, no bad smell, just CA glue removed. Best part only have to use a small amount.

The media could not be loaded. I feel like this product does a really great job at removing small bits of super glue, but it didn't fully work in my case. Maybe if it was on a more solid less porous surface it would have worked better.I accidentally dripped some super glue (Cyafixed medium thin industrial general purpose adhesive) between my legs when I was trying to glue something up, while seated at my desk. I have a synthetic leather gaming chair. The super glue that I use is pretty fast drying, so while I was trying to get it off my hands I hadn't noticed the small blob on my chair as well. When I did notice it, about 20 seconds later, it was pretty much already setting up. I wiped up as much as I could but it wasn't good enough. I got the glue on my hands, my lighter, the part, and my chair. It was a mess! After trying to manually remove the glue from my chrome-coated lighter and failing miserably, to the point of causing damage to the finish, I decided to look up and see if there were chemicals to perform essentially dissolving of the glue. I found that this product was highly recommended by several people in varying industries - mostly in 3D printing.To start, I applied Starbond to my chair. I took video of the whole process, to see it start-to-finish. The chair can be seen with 2 small drops of super glue adhered to the surface of the synthetic leather. After applying the Starbond, the glue still wasn't removed. But, also now was an additional lump on the chair in the shape of an asymmetrical oval around the effected area. It's very clearly evident that the Starbond either soaked thru the leather pores and into the foam padding of the chair, OR, de-bonded whatever chemical make-up the chair cushion had to hold itself together, like a bad chemical reaction. With the super glue still remaining firmly on top of the synthetic leather, I opted to continue and re-try removal. The additional removal processes all resulted in failure. They did lessen the volume of the top-most material, and smoothed out the tops to a dome-like shape, but the substance as a whole remained present and is still visible to this day, as well as the new defect if the chair cushion surface.After each removal of the prior application of Starbond the surfaces were cleaned with IPA to reduce the effect that they'd continue to stay active on the surface and possibly cause a skin irritant.Next, I attempted removal of the super glue from my Zippo lighter. The lighter from my failed manual rough removal resulted in scratches being present on the surface. After applying Starbond the first time, the results were dramatic. It reduced the super glue size from an area about the size of a fingernail to an area about as big as a grain of rice. Then I followed up with additional layers of Starbond, and eventually the super glue was fully removed. Sadly, I'll have to get the lighter re-coated, due to my own mistakes, but at least the super glue is now fully removed, and that process can take place.In short - Starbond is a great product that appears, to me, to work well on hard non-porous surfaces like metal. From my experience here, I wouldn't recommend its use on non-porous objects like clothing and furniture - however, some other people may say differently based on their experiences.

It worked perfectly as advertised. During our closet renovations, the sliding door was replaced with folding doors and an additional piece of flooring inserted and glued, leaving black smudge marks along the flooring. One application of this project, left to sit 10-15 minutes, enabled the complete removal of the excess glue with no adverse effects on the luxury vinyl flooring.

Have tried several solutions to remove set cyanoacrylate without results. Had ber high hopes but pretty expensive for such a small bottle. Applied 3 times following instructions each time and did nothing. Had high hopes this would resolve my issue but nada.Bummer. Don't think id recommend this based on my experience. Sirey

While the product removes super glue, it should not under any circumstances be used on clothing. Leaves a permanent stain

Took some time to work but did a great job. Easy to use